FS-300 Hand Held Impulse Sealer Sealing Machine metal shell

Brief introduction：

    FS series hand impulse sealer suitable for all kinds of plastic films, laminated films and aluminium-plastic film sealing; can be widely used in food, souvenirs, candy, tea, medicine, hardware and other industries. It`s most convenient and economical sealing equipment for shops, families and factories. Type-C and type-M can automatically cut of the bag when finish the sealing, Type-B can print words along with sealing.

Application:

    1. FS series Heat Sealer Impulse are widely used in such industries as foodstuff, special local products, tea, medicine, hardware etc.

    2. They are the most convenient and economical sealing equipments for shops, families and factories.

Characteristic:

    Compact Design

    Strong Water Tight Seal

    Fast Operating

    Power Saving

    Precision Electronic Circuit

    Long Life

Operation:

    Plug cord into outlet.No switch necessary.Machine will operate only when arm is depressed.Regulate the timer according to thickness of material to be sealed.Use a higher-number for thicker material pull handle down.Sealing takes place when light is on.Leave down for additional second after light goes off for a better seal.

    Use a lower number in case seal burns through.

    Raise to higher number when seal isn’t tight.

    Should bag stick to silicon rubber, you did not rice enough cooling time.

    Once you set the time, no need to reset as the machine will remain constant and unchanged.

    No need to remove plug from socket as machine will not operate unit until handle is lowered.No power is consumed.

Notes:

    Always keep sealing platform clean.Leaving residue will reduce life of element, teflon, and silicon rubber.

    Never use moisture to clean sealing surface.

    Replace torn teflon at once.A torn cloth will short circuit the element and damage it.Every time you replace the element, replace the lower and upper teflon cloth.

    For best operation, use only genuine replacement parts.

    A wron silicon rubber will influence the seal, change the silicon when worn or burned.

    Unplug wire when serving the machine.

US Socket 110V 220V compatible